AT90S8515与点阵液晶模块的C语言编程实例源程序无忧电子开发网-在线阅读

综合资讯技术文章原文阅读在线商城下载专区 DATASHEET 技术论坛商务频道
	电子技术 \| 技术资料 \| 嵌入式系统 \| 单片机专题 \| DSP专题 EDA/PLD专题 \| 电源技术专题 \| 电子制作专题 \| 其他综合 \| 芯片选型

所在的位置：首页 → 在线阅读 → 单片机专题 → 正文

AT90S8515与点阵液晶模块的C语言编程实例源程序

发布日期:2005-03-05　作者: 来源:晓奇工作室

/*来源：晓奇工作室*/
/*写汉字液晶子程液晶屏分为4行*12列汉字，全部使用模拟接口方式。
/*   CKW19264A接口程序（模拟方式）
液晶模块供应商：广州市盛宝电子有限公司 Tel:020-87592491 Fax:87541571
Email: tinsharp@public.guangzhou.gd.cn
;************************************************************************
;连线图:
;*LCM----S8515*   *LCM----S8515*   *LCM-----S8515*     *LCM-----S8515* *
;*DB0-----PA0*   *DB4-----PA4*    *D/I------PC6*      *CS1------PC4* *
;*DB1-----PA1*   *DB5-----PA5*    *R/W------PC7*      *CS2------PC5* *
;*DB2-----PA2*   *DB6-----PA6*    *RST------VCC*      *CS3------PD2* *
;*DB3-----PA3*   *DB7-----PA7*    *E--------PC3*   *
;注:S8515的晶振频率为4MHz      *
;************************************************************************/
#include <io8515.h>
#include <macros.h>
#include <worddot.h> /*   自定义字符点阵码文件，存于include目录下 */
file://#include <math.h> /*   数学运算定义，没有使用 */

#pragma interrupt_handler timer:7 /*TC1溢出中断 */
#define Uchar unsigned char

/***********液晶显示器接口引脚定义***************/

#define LCD_E (1 << 3)     // PC3----E
#define LCD_DI (1 << 6)     // PC6----D/I
#define LCD_RW (1 << 7)     // PC7----R/W
#define LCD_CS1 (1 << 4)    // PC4----CS1
#define LCD_CS2 (1 << 5)    // PC5----CS2
#define LCD_CS3 (1 << 2)    // PD2----CS3
#define lcd_set_e() (PORTC |= LCD_E)   // 位置位，输出1
#define lcd_set_di() (PORTC |= LCD_DI)
#define lcd_set_rw() (PORTC |= LCD_RW)
#define lcd_clear_e() (PORTC &= ~LCD_E)  // 位清零，输出0
#define lcd_clear_di() (PORTC &= ~LCD_DI)
#define lcd_clear_rw() (PORTC &= ~LCD_RW)
#define lcd_set_cs1() (PORTC |= LCD_CS1)  // 片选
#define lcd_set_cs2() (PORTC |= LCD_CS2)
#define lcd_set_cs3() (PORTD |= LCD_CS3)
#define lcd_clear_cs1() (PORTC &= ~LCD_CS1)
#define lcd_clear_cs2() (PORTC &= ~LCD_CS2)
#define lcd_clear_cs3() (PORTD &= ~LCD_CS3)
#define LCD_BUSY 0x80    file://LCM忙判断位
#define lcd_read_status() (PINA & LCD_BUSY)  file://LCM忙判断
#define Datalcm PORTA     file://数据口

/***********常用操作命令和参数定义***************/
#define DISPON  0x3f /*显示on  */
#define DISPOFF 0x3e /*显示off  */
#define DISPFIRST 0xc0 /*显示起始行定义 */
#define SETX  0x40 /*X定位设定指令（页） */
#define SETY  0xb8 /*Y定位设定指令（列） */

/**************显示分区边界位置*****************/
#define MODL  0x00 /*左区   */
#define MODM  0x40 /*左区和中区分界 */
#define MODR  0x80 /*中区和右区分界 */
#define LCMLIMIT 0xC0 /*显示区的右边界 */

/****************全局变量定义*******************/
Uchar col,row,cbyte,timer1,timer2,statusm; /*列x,行(页)y,输出数据 */
unsigned int speed=0x7fff;

/*****************函数列表**********************/
void Lcminit(void);  /*液晶模块初始化 */
void Delay(Uchar);  /*延时，入口数为Ms */
void lcdbusyL(void);  /*busy判断、等待(左区) */
void lcdbusyM(void);  /*busy判断、等待(中区) */
void lcdbusyR(void);  /*busy判断、等待(右区) */
void Putedot(Uchar x,Uchar y,Uchar flash *Lib,Uchar Order,Uchar widthw);
void Wrdata(Uchar);  /*数据输出给LCM  */
void Lcmcls( void );  /*LCM全屏幕清零(填充0) */
void wtcom(void);  /*公用busy等待  */
void Locatexy(void);  /*光标定位  */
void WrcmdL(Uchar);  /*左区命令输出  */
void WrcmdM(Uchar);  /*中区命令输出  */
void WrcmdR(Uchar);  /*右区命令输出  */
void Putstr(Uchar x,Uchar y,Uchar flash *puts,Uchar i);/*字符串输出*/
void Rollscreen(Uchar x); /*屏幕向上滚动演示 */
void Rddata(void);  /* 从液晶片上读数据 */
void point(void);  /*打点   */
void Linexy(Uchar x0,Uchar y0,Uchar xt,Uchar yt);
void main_init(void);
void timer(void);
void circle(Uchar Ox,Uchar Oy,Uchar Rx);
/******************数组列表*********************/
Uchar flash Ezk[];  /*ASCII常规字符点阵码表 */
Uchar flash Hzk[];  /*自用汉字点阵码表 */
Uchar flash STR1[];  /*自定义字符串  */
Uchar flash STR2[];  file://flash "=" code(keil c51)
Uchar flash STR3[];  //
Uchar flash STR4[];  //

/********************************/
/* 演示主程序 */
/********************************/
void main(void)

{
Uchar x=0;
DDRD   = 0xFF;  /*|= LCD_CS3; /*定义输出位   */
DDRC   = 0xFF;  /*定义为输出口   */
statusm&=~(1<<7);
main_init();
Delay(5);  /*延时,等待外设准备好  */
Lcminit();  /*液晶模块初始化，包括全屏幕清屏*/
Putstr(0,0,STR3,24); /*第一行字符输出，24字节 */
Putstr(0,2,STR1,12); /*第二行字符输出，12字节（汉字）*/
// Putstr(0,4,STR3,24); /*第三行字符输出，24字节 */
// Putstr(0,6,STR4,24); /*第四行字符输出，12字节 */

Linexy(0,0,191,0);  /*line (0,0)-(191,0) */
Linexy(191,0,191,32);  /*line (191,0)-(191,32) */
Linexy(191,32,0,32);  /*line (191,32)-(0,32) */
Linexy(0,32,0,0);  /*line (0,32)-(0,0) */
Linexy(1,15,191,15);  /*line (1,15)-(191,15) */
Linexy(0,63,44,33);  /*line (0,63)-(44,33) */
Linexy(44,33,191,63);  /*line (44,33)-(191,63) */
circle(46,49,12); file://画一个圆
circle(46,49,11);

while(1){
//  Rollscreen(x);  /*定位新的显示起始行 */
  x++;
  Delay(20);  /*延时，控制滚动速度 */
  };
}

/***************************
   初始化8515定时寄存器
***************************/
void main_init(void)
{
TCCR1A = 0x00;
TCCR1B = 0x00;  /* 停止定时器1   */
TCNT1H = 0x00;  /* 清除定时器1   */
TCNT1L = 0x00;
TIMSK = 0x80;  /* 开放定时器1溢出中断  */
SREG |= 0x80;
TCCR1B = 0x01;  /* 启动定时器1,预分频比例1 */
}
/*************************************
   在定时器中断中做多个分级定时
*************************************/
void timer()
{
timer1--;
if (timer2<0x80) speed+=0x100;
else speed-=0x200;
if (statusm&0x80){
timer2++;
col = (speed>>8)|timer1;
row = (timer2&0x1f)+32;
point();}
}

/************************************************/
/*画圆。数学方程(X-Ox)^2+(Y-Oy)^2=Rx^2 */
/************************************************/

void circle(Uchar Ox,Uchar Oy,Uchar Rx)
{
unsigned int xx,rr,xt,yt,rs;
yt=Rx;
rr=Rx*Rx+1;   file://补偿 1 修正方形
rs=(yt+(yt>>1))>>1;  file://(*0.75)分开1/8圆弧来画
for (xt=0;xt<=rs;xt++)
{
  xx=xt*xt;
  while ((yt*yt)>(rr-xx))yt--;
  col=Ox+xt;  file://第一象限
  row=Oy-yt;
  point();
  col=Ox-xt;  file://第二象限
  point();
  row=Oy+yt;  file://第三象限
  point();
  col=Ox+xt;  file://第四象限
  point();

/***************45度镜象画另一半***************/

  col=Ox+yt;  file://第一象限
  row=Oy-xt;
  point();
  col=Ox-yt;  file://第二象限
  point();
  row=Oy+xt;  file://第三象限
  point();
  col=Ox+yt;  file://第四象限
  point();
}
}

/************************************************/
/*画线。任意方向的斜线,直线数学方程 aX+bY=1 */
/************************************************/
void Linexy(Uchar x0,Uchar y0,Uchar xt,Uchar yt)
{
register Uchar t;
int xerr=0,yerr=0,delta_x,delta_y,distance;
int incx,incy;

delta_x=xt-x0;    /*计算坐标增量 */
delta_y=yt-y0;
col = x0;
row = y0;
if(delta_x>0) incx=1;   /*设置单步方向 */
else if( delta_x==0 ) incx=0;  /*垂直线 */
  else {incx=-1;delta_x=-delta_x;}

if(delta_y>0) incy=1;
else if( delta_y==0 ) incy=0; /*水平线 */
else {incy=-1;delta_y=-delta_y;}

if( delta_x > delta_y ) distance=delta_x; /*选取基本增量坐标轴*/
else distance=delta_y;

for( t=0;t <= distance+1; t++ ) { /*画线输出 */
  point();   /*画点  */
  xerr += delta_x ;
  yerr += delta_y ;

  if( xerr > distance ) {
   xerr-=distance;
   col+=incx;
  }
  if( yerr > distance ) {
   yerr-=distance;
   row+=incy;
  }
}
}

/****************************************/
/* 画点 */
/****************************************/

void point(void)
{
  Uchar x1,y1,x,y;
  x1=col;
  y1=row;
  row=y1>>3;  /*取Y方向分页地址 */
  Rddata();
  y=y1&0x07;  /*字节内位置计算 */
  Wrdata(cbyte|(1<<y)); /*画上屏幕  */
  col=x1;   /*恢复xy坐标  */
  row=y1;
}

/****************************************/
/* 屏幕滚动定位   */
/****************************************/
void Rollscreen(Uchar x)
{
  cbyte = DISPFIRST|x; /*定义显示起始行为x?*/
  WrcmdL(cbyte);
  WrcmdM(cbyte);
  WrcmdR(cbyte);
}

/****************************************/
/* 一个字串的输出   */
/****************************************/
void Putstr(Uchar x,Uchar y,Uchar flash *puts,Uchar i)
{
Uchar j,W,wordx;
for (j=0;j<i;j++)
{
wordx = puts[j];Delay(2);
  if (wordx&0x80)
   {
   Putedot(x,y,Hzk,wordx&0x7f,16); /*只保留低7位 */
   }
  else Putedot(x,y,Ezk,wordx-0x20,8); /*ascii码表从0x20开始*/
  x=col;
  y=row;
}
}

/****************************************/
/*   字符点阵码数据输出   */
/****************************************/
void Putedot(Uchar x,Uchar y,Uchar flash *Lib,Uchar Order,Uchar widthw)
{
Uchar i;
int xi;   /*偏移量，字符量少的可以定义为Uchar */
col = x;  /*暂存x,y坐标，已备下半个字符使用 */
row = y;
xi=Order * widthw<<1;   /*每个字符widthw列 */
/****************上半个字符输出**************/
for(i=0;i<widthw;i++)
  {
  cbyte = Lib[xi];  /*取点阵码，rom数组 */
  Wrdata(cbyte);   /*写输出一字节  */
  xi++;
  col++;
  if (col==LCMLIMIT){col=0;row+=2;}; /*下一列，如果列越界换行*/
   if (row>7) row=0;  /*如果行越界，返回首行 */
  }     /*上半个字符输出结束 */

col = x;     /*列对齐  */
row = y+1;     /*指向下半个字符行 */
/****************下半个字符输出****************/
for(i=0;i<widthw;i++)
  {
  cbyte = Lib[xi];    /*取点阵码  */
  Wrdata(cbyte);    /*写输出一字节  */
  xi++;
  col++;
  if (col==LCMLIMIT){col=0;row+=2;}; /*下一列，如果列越界换行*/
   if (row>7) row=1;  /*如果行越界，返回首行 */
  }     /*下半个字符输出结束 */
row=y;
}      /*整个字符输出结束 */

/****************************************/
/* 清屏，全屏幕清零 */
/****************************************/
void Lcmcls( void )
{
for(row=0;row<8;row++)
for(col=0;col<LCMLIMIT;col++) Wrdata(0);
}

/****************************************/
/* 从液晶片上读数据，保留在全局变量中 */
/****************************************/

void Rddata(void)
{
Locatexy();  /*坐标定位，返回时保留分区状态不变 */
  DDRA = 0; /*改变PA口的状态，作为输入口  */
  Datalcm=0xFF;
  lcd_set_di(); /*数据  */
  lcd_set_rw(); /*读数据 */
  lcd_set_e();
  NOP();  /*读入到LCM */
  cbyte = PINA; /*虚读一次 */
  lcd_clear_e();
Locatexy();  /*坐标定位，返回时保留分区状态不变 */
  DDRA = 0;
  Datalcm=0xFF;
  lcd_set_di(); /*数据  */
  lcd_set_rw(); /*读数据 */
  lcd_set_e();
  NOP();  /*读入到LCM */
  cbyte = PINA; /*从数据口读数据，真读 */
  lcd_clear_e();NOP();
  DDRA = 0xFF; /*改变PA口的状态，作为输出口  */
}

/****************************************/
/* 数据写输出 */
/****************************************/

void Wrdata(Uchar X)
{
Locatexy();  /*坐标定位，保留分区状态不变 */
wtcom();
lcd_set_di();  /*数据输出*/
lcd_clear_rw();
NOP();   /*写输出 */
Datalcm = X;  /*数据输出到数据口 */
lcd_set_e();  /*LCM读入*/
NOP();
lcd_clear_e();
}

/********************************/
/* 命令输出到左区控制口 */
/********************************/

void WrcmdL(Uchar X)
{
  lcdbusyL();  /*确定分区，返回时保留分区状态不变*/
  lcd_clear_di();   /*命令操作 */
  lcd_clear_rw();NOP();  /*写输出 */
  Datalcm = X;   /*数据写到数据口 */
  lcd_set_e();NOP();lcd_clear_e(); /*LCM读入*/
}

/********************************/
/* 命令输出到中区控制口 */
/********************************/

void WrcmdM(Uchar X)
{
  lcdbusyM();  /*确定分区，保留分区状态不变*/
  lcd_clear_di();   /*命令操作 */
  lcd_clear_rw();NOP();  /*写输出 */
  Datalcm = X;   /*命令写到数据口*/
  lcd_set_e();NOP();lcd_clear_e(); /*LCM读入*/
}

/********************************/
/* 命令输出到右区控制口 */
/********************************/

void WrcmdR(Uchar X)
{
  lcdbusyR();  /*确定分区，保留分区状态不变 */
  lcd_clear_di();   /*命令操作  */
  lcd_clear_rw();NOP();  /*写输出  */
  Datalcm = X;   /*命令输出到数据口 */
  lcd_set_e();NOP();lcd_clear_e(); /*读入到LCM */
}

/********************************************************/
/* 分区操作允许等待,返回时保留分区选择状态  */
/********************************************************/
void lcdbusyL(void)
{
lcd_clear_cs1(); /*CLR CS1  */
lcd_set_cs2();  /*SETB CS2  */
lcd_set_cs3();  /*SETB CS3  */
wtcom();  /* waitting for enable */
}

void lcdbusyM(void)
{
lcd_set_cs1();  /*SETB CS1  */
lcd_clear_cs2(); /*CLR CS2  */
lcd_set_cs3();  /*SETB CS3  */
wtcom();  /* waitting for enable */
}

void lcdbusyR(void)
{
lcd_set_cs1();  /*SETB CS1  */
lcd_set_cs2();  /*SETB CS2  */
lcd_clear_cs3(); /*CLR CS3  */
wtcom();  /* waitting for enable */
}

void wtcom(void)
{
DDRA = 0;
lcd_clear_di();  /*CLR DI  */
lcd_set_rw();  /*SETB RW  */
Datalcm = 0xFF;  /*MOV DATA_LCM,#0FFH */
lcd_set_e();NOP();
while(lcd_read_status());
lcd_clear_e();
DDRA=0xFF;
}

/********************************************************/
/*根据设定的坐标数据，定位LCM上的下一个操作单元位置 */
/********************************************************/
void Locatexy(void)
{
Uchar x,y;
switch (col&0xc0)  /* col.and.0xC0 */
  {   /*条件分支执行  */
  case 0:  {lcdbusyL();break;} /*左区 */
  case 0x40: {lcdbusyM();break;} /*中区 */
  case 0x80: {lcdbusyR();break;} /*右区 */
  }
x = col&0x3F|SETX;  /* col.and.0x3f.or.setx */
y = row&0x07|SETY;  /* row.and.0x07.or.sety */
  wtcom();  /* waitting for enable  */
  lcd_clear_di();   /*CLR DI */
  lcd_clear_rw();   /*CLR RW */
  NOP();
  Datalcm = y;   /*MOV P0,Y */
  lcd_set_e();NOP();lcd_clear_e();
  wtcom();   /* waitting for enable */
  lcd_clear_di();   /*CLR DI */
  lcd_clear_rw();   /*CLR RW */
  NOP();
  Datalcm = x;   /*MOV P0,X */
  lcd_set_e();NOP();lcd_clear_e();
}

/********************************/
/*液晶屏初始化 */
/********************************/

void Lcminit(void)
{
  cbyte = DISPOFF; /*关闭显示屏 */
  WrcmdL(cbyte);
  WrcmdM(cbyte);
  WrcmdR(cbyte);
  cbyte = DISPON;  /*打开显示屏 */
  WrcmdL(cbyte);
  WrcmdM(cbyte);
  WrcmdR(cbyte);
  cbyte = DISPFIRST; /*定义显示起始行为零 */
  WrcmdL(cbyte);
  WrcmdM(cbyte);
  WrcmdR(cbyte);
  Lcmcls();  /*清屏  */
}
/********************************/
/* 延时    */
/********************************/
void Delay(Uchar MS)
{
timer1=MS;
while(timer1);
}

/********************************/
file://定义字符串数组 */
/********************************/

Uchar flash STR1[]=
  {
  0x80,0x81,0x82,0x83,0x84,0x85,
  0x86,0x87,0x88,0x89,0x8a,0x8B
  };

Uchar flash STR2[]="http://www.xiao-qi.com/ ";
Uchar flash STR3[]="Program by ICCAVR V6.23B";
Uchar flash STR4[]="Thank you @_@ 1234567890";

/********************************/
/* 定义中文字库 */
/********************************/

unsigned char const Hzk[]={
/*茂 C3515 0 */
0x04,0x04,0xC4,0x44,0x5F,0x44,0x44,0xF4,
0x44,0x4F,0x54,0x64,0x44,0x46,0x04,0x00,
0x80,0x40,0x3F,0x00,0x40,0x40,0x20,0x20,
0x13,0x0C,0x18,0x24,0x43,0x80,0xE0,0x00,
/*兴 C4843 1 */
0x00,0xFE,0x4A,0x4A,0x00,0xFE,0xEA,0xAA,
0xAA,0xFE,0x00,0x4A,0x4A,0xFE,0x00,0x00,
0x02,0x83,0x42,0x22,0x12,0x1B,0x02,0x02,
0x02,0x0B,0x12,0x22,0x62,0xC3,0x02,0x00,
/*国 C2590 2 */
0x00,0xFE,0x02,0xD2,0x52,0x52,0xD2,0x3E,
0xD2,0x16,0x1A,0x12,0xFF,0x02,0x00,0x00,
0x00,0xFF,0x50,0x53,0x52,0x4A,0x6B,0x50,
0x4F,0x54,0x7B,0x40,0xFF,0x00,0x00,0x00,
/*际 C2842 3 */
0x00,0xFE,0x22,0xD2,0x0E,0x20,0xB8,0x4F,
0xB2,0x9E,0x80,0x9F,0x72,0x8A,0x06,0x00,
0x00,0xFF,0x04,0x08,0x07,0x21,0x12,0x0A,
0x46,0x82,0x7E,0x06,0x0A,0x12,0x31,0x00,
/*（ C0308 4 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0xC0,0x30,0x08,0x04,0x02,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x03,0x0C,0x10,0x20,0x40,0x00,0x00,
/*广 C2567 5 */
0x00,0x00,0xFC,0x44,0x54,0x54,0x7C,0x55,
0xD6,0x54,0x7C,0x54,0x54,0x44,0x44,0x00,
0x80,0x60,0x1F,0x80,0x9F,0x55,0x35,0x15,
0x1F,0x15,0x15,0x35,0x5F,0x80,0x00,0x00,
/*东 C2211 6 */
0x00,0x08,0xE8,0xA8,0xA8,0xA8,0xA8,0xFF,
0xA8,0xA8,0xA8,0xA8,0xE8,0x0C,0x08,0x00,
0x00,0x40,0x23,0x12,0x0A,0x06,0x02,0xFF,
0x02,0x06,0x0A,0x12,0x23,0x60,0x20,0x00,
/*） C0309 7 */
0x00,0x00,0x02,0x04,0x08,0x30,0xC0,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x40,0x20,0x10,0x0C,0x03,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*有 C5148 8 */
0x04,0x04,0x04,0x84,0xE4,0x3C,0x27,0x24,
0x24,0x24,0x24,0xF4,0x24,0x06,0x04,0x00,
0x04,0x02,0x01,0x00,0xFF,0x09,0x09,0x09,
0x09,0x49,0x89,0x7F,0x00,0x00,0x00,0x00,
/*限 C4762 9 */
0x00,0xFE,0x02,0x22,0xDA,0x06,0x00,0xFE,
0x92,0x92,0x92,0x92,0xFF,0x02,0x00,0x00,
0x00,0xFF,0x08,0x10,0x08,0x07,0x00,0xFF,
0x42,0x24,0x08,0x14,0x22,0x61,0x20,0x00,
/*公 C2511 10 */
0x00,0x00,0x80,0x40,0x30,0x0C,0x00,0xC0,
0x07,0x1A,0x20,0x40,0x80,0x80,0x80,0x00,
0x01,0x01,0x20,0x70,0x28,0x24,0x23,0x20,
0x20,0x28,0x30,0x60,0x00,0x01,0x00,0x00,
/*司 C4330 11 */
0x10,0x10,0x92,0x92,0x92,0x92,0x92,0x92,
0xD2,0x9A,0x12,0x02,0xFF,0x02,0x00,0x00,
0x00,0x00,0x3F,0x10,0x10,0x10,0x10,0x10,
0x3F,0x00,0x40,0x80,0x7F,0x00,0x00,0x00,
};
/****************************************/
/* 定义ASCII字库8列*16行 */
/****************************************/

unsigned char const Ezk[]={
/*-文字: --0x20 */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:!--0x21 */
0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x27,0x00,0x00,0x00,0x00,
/*-文字:"--0x22 */
0x00,0x08,0x04,0x02,0x08,0x04,0x02,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:#--0x23 */
0x40,0x40,0xF8,0x40,0x40,0xF8,0x40,0x00,
0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,
/*-文字:$--0x24 */
0x00,0x70,0x88,0xFC,0x08,0x08,0x30,0x00,
0x00,0x1C,0x20,0xFF,0x21,0x22,0x1C,0x00,
/*-文字:%--0x25 */
0xF0,0x08,0xF0,0x80,0x70,0x08,0x00,0x00,
0x00,0x31,0x0E,0x01,0x1E,0x21,0x1E,0x00,
/*-文字:&--0x26 */
0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,
0x1E,0x21,0x23,0x24,0x18,0x16,0x20,0x00,
/*-文字:'--0x27 */
0x20,0x18,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:(--0x28 */
0x00,0x00,0x00,0x00,0xC0,0x30,0x08,0x04,
0x00,0x00,0x00,0x00,0x03,0x0C,0x10,0x20,
/*-文字:)--0x29 */
0x04,0x08,0x30,0xC0,0x00,0x00,0x00,0x00,
0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x00,
/*-文字:*--0x2a */
0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,
0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,
/*-文字:+--0x2b */
0x00,0x00,0x00,0xE0,0x00,0x00,0x00,0x00,
0x01,0x01,0x01,0x0F,0x01,0x01,0x01,0x00,
/*-文字:,--0x2c */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x80,0x60,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:---0x2d */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,
/*-文字:.--0x2e */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:/--ox2f */
0x00,0x00,0x00,0x00,0x00,0xE0,0x18,0x04,
0x00,0x40,0x30,0x0C,0x03,0x00,0x00,0x00,
/*-文字:0--0x30 */
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,
/*-文字:1--0x31 */
0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,
0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,
/*-文字:2--0x32 */
0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,
0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,
/*-文字:3--0x33 */
0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,
0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,
/*-文字:4--0x34 */
0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,
0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,
/*-文字:5--0x35 */
0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,
0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,
/*-文字:6--0x36 */
0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,
0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,
/*-文字:7--0x37 */
0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,
0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:8--0x38 */
0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,
0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,
/*-文字:9--0x39 */
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,
/*-文字::-- */
0x00,0x00,0x60,0x60,0x00,0x00,0x00,0x00,
0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,
/*-文字:/-- */
0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,
/*-文字:<-- */
0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,
0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,
/*-文字:=-- */
0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,
0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,
/*-文字:>-- */
0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,
0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,
/*-文字:?-- */
0x00,0x30,0x08,0x08,0x08,0x88,0x70,0x00,
0x00,0x00,0x00,0x26,0x01,0x00,0x00,0x00,
/*-文字:@-- */
0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,
0x07,0x18,0x27,0x28,0x27,0x28,0x07,0x00,
/*-文字:A-- */
0x00,0x00,0xE0,0x18,0x18,0xE0,0x00,0x00,
0x30,0x0F,0x04,0x04,0x04,0x04,0x0F,0x30,
/*-文字:B-- */
0xF8,0x08,0x08,0x08,0x08,0x90,0x60,0x00,
0x3F,0x21,0x21,0x21,0x21,0x12,0x0C,0x00,
/*-文字:C-- */
0xE0,0x10,0x08,0x08,0x08,0x10,0x60,0x00,
0x0F,0x10,0x20,0x20,0x20,0x10,0x0C,0x00,
/*-文字:D-- */
0xF8,0x08,0x08,0x08,0x08,0x10,0xE0,0x00,
0x3F,0x20,0x20,0x20,0x20,0x10,0x0F,0x00,
/*-文字:E-- */
0x00,0xF8,0x08,0x08,0x08,0x08,0x08,0x00,
0x00,0x3F,0x21,0x21,0x21,0x21,0x20,0x00,
/*-文字:F-- */
0xF8,0x08,0x08,0x08,0x08,0x08,0x08,0x00,
0x3F,0x01,0x01,0x01,0x01,0x01,0x00,0x00,
/*-文字:G-- */
0xE0,0x10,0x08,0x08,0x08,0x10,0x60,0x00,
0x0F,0x10,0x20,0x20,0x21,0x11,0x3F,0x00,
/*-文字:H-- */
0x00,0xF8,0x00,0x00,0x00,0x00,0xF8,0x00,
0x00,0x3F,0x01,0x01,0x01,0x01,0x3F,0x00,
/*-文字:I-- */
0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:J-- */
0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x00,
0x00,0x1C,0x20,0x20,0x20,0x20,0x1F,0x00,
/*-文字:K-- */
0x00,0xF8,0x00,0x80,0x40,0x20,0x10,0x08,
0x00,0x3F,0x01,0x00,0x03,0x04,0x18,0x20,
/*-文字:L-- */
0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x3F,0x20,0x20,0x20,0x20,0x20,0x20,0x00,
/*-文字:M-- */
0xF8,0xE0,0x00,0x00,0x00,0xE0,0xF8,0x00,
0x3F,0x00,0x0F,0x30,0x0F,0x00,0x3F,0x00,
/*-文字:N-- */
0x00,0xF8,0x30,0xC0,0x00,0x00,0xF8,0x00,
0x00,0x3F,0x00,0x01,0x06,0x18,0x3F,0x00,
/*-文字:O-- */
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,
/*-文字:P-- */
0xF8,0x08,0x08,0x08,0x08,0x10,0xE0,0x00,
0x3F,0x02,0x02,0x02,0x02,0x01,0x00,0x00,
/*-文字:Q-- */
0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
0x00,0x0F,0x10,0x20,0x2C,0x10,0x2F,0x00,
/*-文字:R-- */
0xF8,0x08,0x08,0x08,0x08,0x90,0x60,0x00,
0x3F,0x01,0x01,0x01,0x07,0x18,0x20,0x00,
/*-文字:S-- */
0x60,0x90,0x88,0x08,0x08,0x10,0x20,0x00,
0x0C,0x10,0x20,0x21,0x21,0x12,0x0C,0x00,
/*-文字:T-- */
0x08,0x08,0x08,0xF8,0x08,0x08,0x08,0x00,
0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:U-- */
0xF8,0x00,0x00,0x00,0x00,0x00,0xF8,0x00,
0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,
/*-文字:V-- */
0x18,0xE0,0x00,0x00,0x00,0xE0,0x18,0x00,
0x00,0x01,0x0E,0x30,0x0E,0x01,0x00,0x00,
/*-文字:W-- */
0xF8,0x00,0xC0,0x38,0xC0,0x00,0xF8,0x00,
0x03,0x3C,0x03,0x00,0x03,0x3C,0x03,0x00,
/*-文字:X-- */
0x08,0x30,0xC0,0x00,0xC0,0x30,0x08,0x00,
0x20,0x18,0x06,0x01,0x06,0x18,0x20,0x00,
/*-文字:Y-- */
0x08,0x30,0xC0,0x00,0xC0,0x30,0x08,0x00,
0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:Z-- */
0x08,0x08,0x08,0x08,0xC8,0x28,0x18,0x00,
0x30,0x2C,0x22,0x21,0x20,0x20,0x20,0x00,
/*-文字:{-- */
0x00,0x00,0x00,0x80,0x7E,0x02,0x00,0x00,
0x00,0x00,0x00,0x00,0x3F,0x20,0x00,0x00,
/*-文字:\-- */
0x00,0x08,0x70,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x01,0x0E,0x30,0xC0,0x00,
/*-文字:}-- */
0x00,0x02,0x7E,0x80,0x00,0x00,0x00,0x00,
0x00,0x20,0x3F,0x00,0x00,0x00,0x00,0x00,
/*-文字:^-- */
0x00,0x08,0x04,0x02,0x02,0x04,0x08,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:_-- */
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
/*-文字:`-- */
0x00,0x00,0x02,0x06,0x04,0x08,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/*-文字:a-- */
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
0x00,0x19,0x24,0x24,0x24,0x14,0x3F,0x00,
/*-文字:b-- */
0x00,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,
0x00,0x3F,0x11,0x20,0x20,0x20,0x1F,0x00,
/*-文字:c-- */
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
0x0E,0x11,0x20,0x20,0x20,0x20,0x11,0x00,
/*-文字:d-- */
0x00,0x00,0x80,0x80,0x80,0x00,0xF8,0x00,
0x00,0x1F,0x20,0x20,0x20,0x11,0x3F,0x00,
/*-文字:e-- */
0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,
0x0E,0x15,0x24,0x24,0x24,0x25,0x16,0x00,
/*-文字:f-- */
0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x00,
0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:g-- */
0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,
0x40,0xB7,0xA8,0xA8,0xA8,0xA7,0x40,0x00,
/*-文字:h-- */
0x00,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,
0x00,0x3F,0x01,0x00,0x00,0x00,0x3F,0x00,
/*-文字:i-- */
0x00,0x00,0x00,0x98,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:j-- */
0x00,0x00,0x00,0x00,0x98,0x00,0x00,0x00,
0x00,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,
/*-文字:k-- */
0x00,0xF8,0x00,0x00,0x00,0x80,0x00,0x00,
0x00,0x3F,0x04,0x02,0x0D,0x10,0x20,0x00,
/*-文字:l-- */
0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,
/*-文字:m-- */
0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,
0x3F,0x00,0x00,0x3F,0x00,0x00,0x3F,0x00,
/*-文字:n-- */
0x00,0x80,0x00,0x80,0x80,0x80,0x00,0x00,
0x00,0x3F,0x01,0x00,0x00,0x00,0x3F,0x00,
/*-文字:o-- */
0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,
0x0E,0x11,0x20,0x20,0x20,0x11,0x0E,0x00,
/*-文字:p-- */
0x00,0x80,0x00,0x80,0x80,0x80,0x00,0x00,
0x00,0xFF,0x11,0x20,0x20,0x20,0x1F,0x00,
/*-文字:q-- */
0x00,0x00,0x80,0x80,0x80,0x00,0x80,0x00,
0x00,0x1F,0x20,0x20,0x20,0x11,0xFF,0x00,
/*-文字:r-- */
0x00,0x00,0x80,0x00,0x00,0x80,0x80,0x00,
0x00,0x00,0x3F,0x01,0x01,0x00,0x00,0x00,
/*-文字:s-- */
0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
0x00,0x13,0x24,0x24,0x24,0x24,0x19,0x00,
/*-文字:t-- */
0x00,0x80,0x80,0xE0,0x80,0x80,0x80,0x00,
0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x00,
/*-文字:u-- */
0x00,0x80,0x00,0x00,0x00,0x00,0x80,0x00,
0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x00,
/*-文字:v-- */
0x80,0x00,0x00,0x00,0x00,0x00,0x80,0x00,
0x00,0x07,0x18,0x20,0x18,0x07,0x00,0x00,
/*-文字:w-- */
0x80,0x00,0x00,0x80,0x00,0x00,0x80,0x00,
0x0F,0x30,0x0E,0x01,0x0E,0x30,0x0F,0x00,
/*-文字:x-- */
0x80,0x00,0x00,0x00,0x00,0x00,0x80,0x00,
0x20,0x11,0x0A,0x04,0x0A,0x11,0x20,0x00,
/*-文字:y-- */
0x80,0x00,0x00,0x00,0x00,0x00,0x80,0x00,
0x00,0x87,0x98,0x60,0x18,0x07,0x00,0x00,
/*-文字:z-- */
0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,
0x00,0x30,0x28,0x24,0x22,0x21,0x20,0x00,
/*-文字:{-- */
0x00,0x00,0x00,0x80,0x7E,0x02,0x00,0x00,
0x00,0x00,0x00,0x00,0x3F,0x20,0x00,0x00,
/*-文字:|-- */
0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,
/*-文字:}-- */
0x00,0x02,0x7E,0x80,0x00,0x00,0x00,0x00,
0x00,0x20,0x3F,0x00,0x00,0x00,0x00,0x00,
/*-文字:~-- */
0x00,0x06,0x01,0x01,0x06,0x04,0x03,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};

信息发布: 转引自: 【大中小】【打印】【关闭】

谢谢，现在还没有相关信息...